| Price | Negotiatable |
| MOQ | 1 set |
| Delivery Time | 30 days |
| Brand | HongCe |
| Place of Origin | China |
| Certification | Calibration Certificate(cost additional) |
| Model Number | HJ0605 |
| Packaging Details | Plywood |
| Payment Terms | L/C, T/T |
| Supply Ability | 10 Sets per month |
| Place of Origin | China | Withdrawable Angle | 30~70°, can be preset |
| Test Cycles | 0~9999 times, the test device will stop working automatically when the preset test cycles are finished | Input Power | 220V/50HZ |
| Packaging Details | Plywood | Model Number | HJ0605 |
| Supply Ability | 10 Sets per month | Test Speed | 30 cycles / min (or at the maximum rate allowed by the construction of the cord reel if this is less) |
| Certification | Calibration Certificate(cost additional) | Drive Mode | Pneumatic |
| Brand Name | HongCe | Payment Terms | L/C, T/T |
| Gas Source | Compressed air 5 ~ 7kg / cm² | Delivery Time | 30 days |
| Price | Negotiatable | Minimum Order Quantity | 1 set |
Appliance Tester Automatic Cord Reels Endurance Tester Withdrawable Stroke Maximum 1000mm
Standard
Clause 22.16 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements.
Application
It is used to check the automatic cord reels shall be constructed so that they do not cause
– undue abrasion or damage to the sheath of the flexible cord;
– breakage of conductor strands;
– undue wear of contacts.
Test sample
Automatic cord reels of household appliances and similar electrical appliances.
Feature
The device adopts a multi-functional fixture, large work surface, can test cord reels up to 300cm, test speed (5-30 times / min) is adjustable, and it is suitable for most test electrical products.
Parameters
| Input Power | 220V/50HZ |
| Gas Source | Compressed air 5 ~ 7kg / cm² |
| Test Speed | 30 cycles / min (or at the maximum rate allowed by the construction of the cord reel if this is less) |
| Test Cycles | 0~9999 times, the test device will stop working automatically when the preset test cycles are finished |
| Drive Mode | Pneumatic |
| Withdrawable Angle | 30~70°, can be preset |
| Fixture | Quick clamping fixtures, easy for clamping the test sample |
| Withdrawable Stroke | Maximum 1000mm, can be adjusted |
